Intermec 6400 - Manual (Page 26)

General Information SECTION 1
1-18 6400 Hand-Held Computer User’s Guide
[l/O] Suspend or Resume
Pressing the [I/O] key does not turn the computer off com-
pletely, but instead puts it into a suspend mode. Suspend
mode enables the computer to conserve power but also en-
ables it to respond quickly to data entry. Your hand-held
computer responds to the scan key, the trigger on the scan-
ner handle, or the [I/O] key. To force your computer into
suspend, press the [I/O] key. Opening the battery pack door
latch also puts your computer into suspend.
Thecomputer puts itself into suspend mode if no activity
has occurred for a set period of time. The time that elapses
before it suspends is determined by the parameters you set
using your application software, AUTOEXEC.BAT or CON-
FIG.SYS files.
Handstrap
An elastic handstrap is included for your hand-held comput-
er. Using the handstrap provides comfort to you and also
helps prevent you from accidentally dropping your comput-
er.
Whether you are left or right handed, the handstrap can be
secured to accommodate your need. Figure 1-8 and
Figure 1-9 on page 1-19 show how to fasten the handstrap
to the top and bottom of your computer.
Available as options and accessories are an adjustable
handstrap and an adjustable wriststrap. These are shown
in NO TAG and NO TAG on pages 1-29 and NO TAG and
can be attached for either left or right handed use.