Intermec 6400 - Manual (Page 91)

SECTION 3 Terminal Emulation Menu Screens
6400 Hand-Held Computer User’s Guide 3-19
Scan Options
Use the Scan Options menu to designate how the hand-held
computer handles scanned bar codes. The Scan Options
menu is shown below. Descriptions of the options follow.
1) Redundancy
2) MOD 10 Check
3) Concatenate
4) BC Type Char
5) Stream Scan
6) Scan All Flds
7) More
Scan Options
Redundancy: This option requires two identical scans of a
bar code, one right after another, before the hand-held com-
puter accepts the scan as valid.
Mod 10 Check: When you select this option, a check digit
is added at the end of the bar code after a good read. This is
a variation of the modulus 10 formula and is used infre-
quently.
For additional information on Mod10, refer to the book
PEN*KEY R 6400 Programmers Reference Guide p/n:
977-054-004.
Concatenate: Each bar code read is added to the end of
the previous bar code read until the computer meets a
condition that forces transmission to the host.
When this option is OFF, each bar code read is placed at the
beginning of the current input field. After a bar code is
placed in a field, any subsequent read replaces the first
read.
BC Type Char: This option adds a character associated
with the bar code type at the beginning of the scanned bar
code.
Stream Scan: If the scanned bar code is too big for the
input field, the overflow information appears in the next
field. This continues until the entire bar code is entered.