Intermec 6400 - Manual (Page 99)

SECTION 3 Terminal Emulation Menu Screens
6400 Hand-Held Computer User’s Guide 3-27
Width
xx
Host View Sze
To change the width, enter a number (between 1 -- 80).
Press [ENT]. and return to the Protocol Opts menu.
Data Stream
Use this menu to specify the data stream used by the host
computer.
1) Native
2) 3270
3) 5250
4) VT/ANSI
Data Stream
6400 WTP only,
blank if TCP/IP
Enter the number corresponding to the type of the host
computer. Press [ENT] and return to the Protocol Opts
menu.
Extended CMDS
With this option ENABLED, the host computer can change
or use the following features of the hand-held computer:
"
RS-232 communications (e.g., printer)
"
Bar code options
"
Display screen and font size
"
Error tone