Intermec 6400 - Manual (Page 101)

SECTION 3 Terminal Emulation Menu Screens
6400 Hand-Held Computer User’s Guide 3-29
Telnet allows for the handling of telnet option negotiations
to establish a session with an appropriate telnet server.
To enable these options:
1. Press [1] to enable the Beep On Error option.
Press [2] to enable the Auto Tab Scan option.
Press [3] to enable the Telnet option, this can not be
changed if you are using 6400 TCP/IP.
2. Press [ENT] to return to the Protocol Options menu
screen.
Device Name allows you to enter a physical name for the
device. This name is 1--10 characters with allowable values
of A--Z, a--z, 0--9, and #, $, --, and @. Support of 5250E RFC
1572.
3270 Options
The 3270 Options menu lets you enable the following fea-
tures if you are using the 3270 communication protocol:
"
Keyboard Unlock
"
Auto Tab Scn (scan)
"
Auto Entr (enter) Scn
"
Emulate 3210
"
Telnet
"
Origin Set
1) Keybrd Unlock
2) Auto Tab Scan
3) Auto Entr Scn
4) Emulate 3210
5) Telnet
6) Origin Set
3270 Options
Enabling Keyboard Unlock unlocks the keyboard after the
[PA1], [PA2], or [CLEAR] keys are pressed. (Normally the
keyboard remains locked—until unlocked or the hand-held
computer is reset by the host—after any of these keys are