Intermec 6400 - Manual (Page 107)

SECTION 3 Terminal Emulation Menu Screens
6400 Hand-Held Computer User’s Guide 3-35
1) Application
2) Numeric
Keypad Mode
4) Keypad Mode, determines what is returned to the host
when the keys are pressed. The default setting is Numeric.
1) Application
2) Cursor
Cursor Mode
5) Cursor Mode, determines what is returned to the host
when the cursor keys are hit. The default setting is Cursor.
1) 7-Bit
2) 8-Bit
Terminal Mode
6) Terminal Mode, the control codes are sent back to the
host as either 7 or 8 bit.
Native (For 6400 WTP Only)
This option is enabled by default to preserve backward com-
patibility. When enabled, pressing <F1> is equivalent to
pressing Blue-0, while pressing <F2> is equivalent to press-
ing Blue-1, etc. When disabled, <F1> is equivalent to
Blue-1, and <F2> is equivalent to Blue-2, etc.