Intermec 6400 - Manual (Page 135)

SECTION 3 Terminal Emulation Menu Screens
6400 Hand-Held Computer User’s Guide 3-63
To Exit Emulation Mode and Return to
DOS
If you want to exit the emulation program you are using
and return back to the DOS keyboard layout complete these
two steps.
1. Do a Cold Restart.
2. Press “Y”.
3. Press [ENT] several times. This puts you at the DOS
C:\ prompt.
If you do the hard reset of pressing and holding the blue
and yellow shift keys, and both [ENT] keys this exits you to
the beginning of the current emulation you are using.