Intermec 6400 User Manual
Page 162
APPENDIX B
Norand
R
Utilities Program
B-12 6400 Hand-Held Computer User’s Guide
“138”
Command not valid to cancel
“164”--“179”
Unusual network condition
“180”--“354”
Adapter malfunction
These error codes apply when COMM SETTINGS is set to
MODEM/DIRECT and PROTOCOL is set to TTY:
“0”
No error
“6”
[--] key pressed, aborting communications
“11”
Invalid parameter specified in control file
“23”
End of transmission
“101” Line lost
“102” Parity error
“103” Character gap too long
“104” Data loss
“105” Excessive NAKs (no acknowledgements)
“106” Block count error
“107” Block check error
“108” Block framing error
“109” Control character error
“2xx” Modem error
“xx”
Hayes response code, or code defined by
program:
“86”
Error sending command to
modem
“87”
Expected numeric response not
numeric
“88”
Invalid response format
“89”
No significant response from
modem
“97”
COM port disabled by system
due to low battery or removal of
PC card modem.
“98”
Unrecognized English response
“99”
Memory allocation error