Removing the main battery – Intermec 6400 User Manual
Page 48
Advertising
Operation
SECTION 2
2-6 6400 Hand-Held Computer User’s Guide
Removing the Main Battery
Before you remove the main battery pack, ensure that your
computer is in a “Suspend” mode, meaning that the display
is blank. To suspend press the
[I/O] key.
The steps on this page and NO TAG detail how to remove
the main battery and check how much power remains.
Refer to Installing the Main Battery on page 2-5 for
replacing the battery.
1. With your thumb, firmly push the release latch for-
ward. Battery pops up and out of the compartment.
2. Lift battery out.
Figure 2-3
Removing Main Battery Pack
Release Latch
Rechargeable Battery Pack
(contacts on underside)
Advertising