Intermec 6400 - Manual (Page 94)

Terminal Emulation Menu Screens SECTION 3
3-22 6400 Hand-Held Computer User’s Guide
Scan Options of Additional Bar Codes
This menu offers additional bar code selections. After enab-
ling a bar code symbology, you can set various options for
the bar code, then set length options for the bar code.
When all options have been set, the display returns to the
Scan Options (2) menu. The Scan Options (2) menu and the
bar code symbologies you can enable from it are shown be-
low.
When you have enabled all needed bar code symbologies,
press the [ENT] key. You return to the first Scan Options
menu. Press the [ENT] key again to back out and return to
the Set-Up Parms menu.