3210 emulation – Intermec 6400 User Manual

Page 102

Advertising
background image

Terminal Emulation Menu Screens

SECTION 3

3-30 6400 Hand-Held Computer User’s Guide

pressed.) When using Token Ring on your host, the tab key

also unlocks the keyboard.
Enabling Auto Tab Scan causes the cursor to tab forward to

the next input field whenever a good scan is obtained.
Enabling Auto Entr Scan actuates the [ENTER] function

whenever a good scan is obtained.
Enabling Emulate 3210 allows your 3270 keyboard to emu-

late a 3210 terminal.
Telnet allows for the handling of telnet option negotiations

to establish a session with an appropriate telnet server.

This can not be changed if you are using 6400 TCP/IP.
Origin Set when enabled, will reset the screen origin when

an exclamation mark is found in the data stream.
To enable these options:

1. Press [1] to enable the Keyboard Unlock option.

Press [2] to enable the Auto Tab Scan option.

Press [3] to enable the Auto Entr Scan option.

Press [4] to enable 3210 Emulation option.

Press [5] to enable the Telnet option.

Press [6] to enable the Origin setting.

" NOTE:

Auto Tab Scan and Auto Entr Scan cannot be enabled at the same

time.

2. Press [ENT] to return to the Protocol Options menu

screen.

3210 Emulation

The Intermec 3210 emulation option causes your radio

hand-held computer to perform the same functions as the

RT3210 hand-held computer. For full 3210 compatibility:

you must disable buffering the keyboard, set cursor to lazy

mode, and set the LCD Parms to Key Uppercase.
After enabling the desired 3270 options, press the [ENT]

key to return to the Protocol Opts menu.

Advertising