Intermec 6400 - Manual (Page 172)

APPENDIX B Norand R Utilities Program
B-22 6400 Hand-Held Computer User’s Guide
" NOTE: Testing the modem initialization string is optional.
"
To test the modem string, do the following:
a. Press the [F2] key. The computer replies with
“PLEASE WAIT” and tests the string:
PLEASE WAIT . . .
ATE0V0Q0&M0&S1&C1&
D0&R/QX0L1
MODEM INIT STRING
[F2]TEST STRING
[ENT]OK [--]QUIT
Momentarily, the computer displays the modem’s
response:
RESULT: 97
ATE0V0Q0&M0&S1&C1&
D0&R/QX0L1
MODEM INIT STRING
[F2]TEST STRING
[ENT]OK [--]QUIT
" NOTE: Zero indicates the modem was successfully configured. Any other
value indicates an error. See page B-12 for a list of modem errors
defined by this program. If this is a NORAND modem, contact the
Norand Customer Response Center at 1-800-221-9236. If this is not
a NORAND modem, contact your modem supplier.
b. Press the [ENT] key to update the modem initial-
ization string. The computer returns to the Modem
Parameters pop-up menu with OTHER EXTER-
NAL or OTHER INTERNAL assigned.