Janome MEMORY CRAFT 10001 - Manual (Page 104)

103
3.5
2.20
4.2
Default Cancel OK
8 7 6
A Z
Adjust
Knit Woven
Straight Stitch
Locking Stitch Lock-a-Matic
A
Auto
1 2 9
Adjust
1
2
9
5
4
3
Seaming
When you press the Seaming key, the
Seaming window will appear.
In the Seaming window, the straight stitch of
center needle position with the stitch length
2.2 mm (3/32˝) will be automatically selected.
In the Seaming Mode you may select the
following stitches:
(1) Straight Stitch for woven fabrics
(2) Stretch Stitch for elastic fabrics
(3) Lock-a-Matic Stitch
(4) Locking Stitch
Function keys:
1 Needle Up/Down Key : Press the key
to set the needle position up or down
when stopping the machine.
2 Adjust Key : Press the key to open
the Manual Setting window.
3 Needle Drop Position : Press the Needle
Drop Position or keys to change
the needle drop position.
4 Stitch Length : Press the Stitch Length
or keys to increase/decrease the
stitch length.
5 Thread Tension : Press the Thread Tension
or keys to increase/decrease the
thread tension.
6 Default key : When you press the key,
all function values on the screen will
return to the default settings (the same
settings as when you purchased the
machine).
7 Cancel key : When you press key,
the adjust window will close and the
setting remains.
8 OK key : Press key. The setting is
registered and the screen returns to the
previous window.
9 Return key : Press this key to return to the
initial Sewing Application window.
Default
Cancel
OK
Adjust