Janome MEMORY CRAFT 10001 - Manual (Page 33)

32
1
6 7 8 9 10
11 12 13 14 15
2 3 4 5
Adjust
16
Strai g ht Stitch
A
Auto
A Z
When you press Ordinary Sewing Mode key,
the Utility Stitch Window opens.
In the Ordinary Sewing Mode, there are 6
categories of sewing to choose from.
1 Utility stitches : You can select 16 types
of utility stitches.
2 Buttonhole stitches : You can select 11
types of buttonholes, button sewing,
darning, tacking and eyelet.
3 Satin stitches : You can select satin
stitches, elongate patterns and also
program assorted stitch combinations.
4 Decorative stitches : You can select
decorative stitches and also program
assorted stitch combinations.
5 Monogramming : You can make
monograms and combinations of letters,
symbols and patterns.
6 Sewing Application key : When you
select Sewing Application, the machine
automatically selects the appropriate stitch
for the sewing project.
Function keys:
You can change the machine settings for
the selected stitch by the following keys.
7 Twin Needle key
Press this key when you wish to sew with a
twin needle. The key will be grayed out if
the selected stitch is not suitable for twin
needle sewing.
8 Needle Up/Down key : You can set the
needle position with this key, up or down
when the machine stops.
9 Adjust key : When you press this key, the
stitch adjusting window will open. You can
change settings to stitch length, width and
thread tension by pressing the or
keys.
10 Needle drop position adjusting keys
11 Stitch length adjusting keys
12 Thread tension adjusting keys
13 Default key
14 Cancel key
15 OK key
NOTE:
• Refer to page 36 for adjusting settings.
ORDINARY SEWING
Adjust
3.5 2.20 4.2
Default
Cancel
OK
1
2 3 5
6
7
8
7
9
10 11 12
14
4
8
9
15
13