Janome MEMORY CRAFT 10001 - Manual (Page 71)

70
Darning
Memory Craft 10001 automatically darns rips
and holes. Large and small holes can be
mended quickly and easily with this unique
stitch.
Automatic Buttonhole Foot R is used to hold
the fabric securely in place while darning.
For extra support, or to strengthen the darn,
pin or baste a backing fabric such as organdy
under the hole.
Select Pattern 29.
Pull the Button Holder to the rear.
Place the garment under the foot. Press the
Up/Down Needle Button twice. Remove the
fabric to the left to draw both threads under the
foot and put the fabric back under the foot.
Lower the foot. Press the Start/Stop Button,
the machine will lock stitch, sew rows of
darning, lock stitch and stop automatically.
Repeat sewing by turning the fabric to
reinforce it.
1 Button Holder
NOTE:
•
The maximum size of darning is 2 cm (3/4˝)
long and 0.7 cm (1/4˝) wide.
2 Maximum Length 2cm (3/4˝)
3 Maximum Width 0.7 cm (1/4˝)
Adjust
19 20 21
22 23 24 26
27 28 30 31
R
25
17
SEN
A Z
Darning
Sew to length
required, then press" "
18
AUT
29
Auto
1
2
3