Janome MEMORY CRAFT 10001 - Manual (Page 74)

73
Adjust
19 20 21
22 23 24 26
27 28 29 31
25
17
SEN
Auto Eyelet
F
18
AUT
30
Eyelet
The Eyelet is used for belt holes etc.
Press Pattern 31 on the Visual Touch
Screen.
Attach the Satin Stitch Foot F.
Depress the Foot Control to sew.
The machine will stop automatically when
completed.
Open the eyelet with an awl, punch or
pointed scissors.
Adjusting the shape of an Eyelet
By pressing the Adjust key, the Manual
Adjusting screen will appear.
Press the or the key to adjust.
1 Shape Adjust Key (Press the key if
the eyelet opens. Press the key if
the eyelet overlaps.)
2 Thread Tension Adjust Key
3 Default Key
When you press the key all
function values on the screen will return
to the default settings (the same settings
as when you purchased the machine).
4 Cancel Key
When you press the key, the
adjust window will close and the setting
remains unchanged.
5 OK Key
When you press the key, the window
will close and go back to the original
screen with the new setting being
registered.
S 2 2.6
Default
Cancel
OK
1 2
3
4
5
Default
OK
Cancel