Janome MEMORY CRAFT 10001 - Manual (Page 42)

41
3.5 2.20 4.2
Default
Cancel
OK
1
2
3
4
1
2
1
2
Changing thread tension
Balanced needle thread tension:
In straight stitching, the Needle Thread and
Bobbin Thread cross in the middle of the
fabric.
1 Needle Thread
2 Bobbin Thread
3 Right Side of the Fabric
4 Wrong Side of the Fabric
When the needle thread tension is too tight;
Press the key to decrease the thread
tension.
Press key to register the setting.
When the needle thread tension is too loose;
Press the key to increase the thread
tension.
Press key when the tension is set.
NOTE:
• When you turn the power switch off or
select the other pattern, changes to the
settings will be cancelled.
OK
OK