Janome MEMORY CRAFT 10001 - Manual (Page 75)

74
Adjust
32 33 34 35 36
37 38 39 40 41
42 43 44
1/2
Cording
F
Auto
A Z
7.0 0.40 2.2 1
Default
Cancel
OK
X
Adjust
e
1 2
1
2
3 4 6 5
7
8
9
Press Satin Stitch Key in the Ordinary Sewing
Mode to open the Satin Stitch Window.
Function Keys:
1 Needle Up/Down Key : Press the Needle
Up/Down key to set the needle position up
or down when stopping the machine.
2 Adjust Key : Press the Adjust key to open
the Adjusting window.
3 Zigzag Width : Press the Zigzag Width
or keys to change the stitch
widths.
4 Stitch Length: Press the Stitch Length
or keys to increase/decrease the
stitch length.
5 Elongation Key : The Elongation key is
used to change the elongation of decorative
stitch patterns.
6 Thread Tension : Press the Thread Tension
or keys to increase/decrease the
thread tension.
7 Default Key : When you press the key,
all settings in the adjusting window will
return to default (the same settings as
when you purchased the machine).
8 Cancel Key : When you press key,
the adjusting window will close and the
setting remains.
9 OK Key : Press key. The setting is
registered and the screen returns to the
previous window.
Satin Stitches
Default
Cancel
OK