Janome MEMORY CRAFT 10001 - Manual (Page 72)

71
Default
Cancel
OK
Default
Cancel
OK
5.0
4.2
1 9
Restart for the same size.
Different size Cancel
2
1
To sew a shorter darning
To sew a darning a length of less than 2 cm
(3/4˝), first stop the machine after sewing the
Required Length, then press the Reverse
Button. The Required Length has now been
determined.
Now restart the machine and continue sewing
until the machine stops automatically.
1 Required Length
2 Reverse Button
To sew the same size darning
Simply restart the machine to sew another
darning in the same size.
To sew the next darn at a different size, press
the key.
To adjust the evenness of darning
You can correct the unevenness of darning by
pressing the or keys.
If the left corner is lower than the right side,
press the key to correct it, and vice versa.
NOTE:
• The default setting is 5.0.
Cancel