Janome MEMORY CRAFT 10001 - Manual (Page 112)

111
1
2
3
4
Restart for the same size.
Different size Cancel
Auto
F
Tacking
Auto
Stabdard length 1 cm
is sewn automatically.
Manual
Tacking
When you press the Tacking key, the Tacking
window will appear.
The standard tacking length of 1 cm (1/4˝) will
be automatically set.
In the Tacking Mode, you may select the
following:
A: Automatic Tacking
B: Manual Tacking
Automatic tacking
The machine will sew a tack 1 cm (1/4˝) long
and stop automatically.
Press the key if you wish to change the
stitch width and length.
1 1 cm (1/4˝)
Manual tacking
You can sew a tack to the required length and
memorize its length.
The maximum length of the tack is 1.5 cm (5/8˝).
Sew to your Required Length and press the
Reverse Button, the Tack Length is
automatically memorized.
2 Required Length
3 Reverse Button
4 Tack Length
To sew a tack in the same length
After the machine automatically stops, the
prompt window will appear.
Simply restart the machine to sew the tack in
the same length.
Press key to sew a different length tack.
Adjust
Cancel
A
B