SnapGear 2.0.1 User Manual
Page 117
Virtual Private Networking
113
Windows 95, Windows 98 and Windows Me
From the Dial-Up Networking folder, double-click Make New Connection. Type
CyberGuard SG appliance or a similar descriptive name for your new VPN connection.
From the Select a device drop-down menu, select the Microsoft VPN Adapter and click
Next. Enter the PPTP IP address of the CyberGuard SG appliance VPN server in the
VPN Server field. This may change if your ISP uses dynamic IP assignment. Click OK
and then click Finish.
Figure 9-6
Right-click the new icon and select Properties.
Select the Server Types tab and check the Log on to network and Enable software
compression checkboxes. Leave the other Advanced Options unchecked.
Select the TCP/IP network protocols from the Allowed network protocols list.
Warning
Ensure NetBEUI and IPX are not selected. If an unsupported protocol is selected, an
error message is returned.