SnapGear 2.0.1 User Manual

Page 36

Advertising
background image

Getting Started

32

Disabling the Reset Button on your CyberGuard SG PCI
Appliance

For convenience, the CyberGuard SG appliance ships with the rear panel Reset button
enabled. This allows the CyberGuard SG appliance’s configuration to be reset to factory
defaults.

From a network security standpoint, it may be desirable to disable the Reset switch after
initial setup has been performed. This is accomplished by removing the jumper linking
CON2 on the CyberGuard SG appliance.

This jumper is labeled Remove Link to Disable Erase.

Advertising