SnapGear 2.0.1 - Manual (Page 35)

Getting Started
31
Next, configure your PC to obtain its network settings automatically from your LAN DHCP
server.
Click Start -> Settings -> Control Panel and double click Network Connections.
Right click on Local Area Connection (or appropriate network connection for the newly
installed PCI appliance) and select Properties.
Select Internet Protocol (TCP/IP) and click Properties and click Properties.
Figure 2-12
Check Obtain an IP address automatically, check Obtain DNS server address
automatically and click OK.
Attach your CyberGuard SG appliance’s Ethernet port to your LAN’s hub. If you cannot
connect to PCs on your LAN, reboot your PC. You are now finished.