SnapGear 2.0.1 - Manual (Page 20)

Getting Started
16
The Quick Setup Wizard will display.
Figure 2-3
Hostname: You may change the name the CyberGuard SG appliance knows itself by.
This is not generally necessary.
Manual configuration: Select this to manually specify your CyberGuard SG appliance’s
LAN connection settings.
Skip: LAN already configured: Select this if you wish to use the CyberGuard SG
appliance’s initial network settings (IP address 192.168.0.1 and subnet mask
255.255.255.0) as a basis for your LAN settings. You may skip to the next step.
Obtain LAN IP address from a DHCP server on LAN (not generally recommended):
Select this if you have an existing DHCP server that you wish to have automatically
configure your CyberGuard SG appliance’s LAN connection settings. You may skip to
the next step.
Click Next.