SnapGear 2.0.1 User Manual
Page 32
Getting Started
28
The first IP address will be used by the Web Management Console.
Figure 2-9
Enter this IP address and the subnet mask for your LAN into the IP Address / Netmask
fields on the Web Management Console’s Bridge IP Configuration page.
Ensure DHCP assigned is unchecked.
You may also enter one or more DNS Server(s) to be used by the CyberGuard SG
appliance, not your PC, for Internet name resolution.
Click Apply and Reboot.
Next, configure your PC with the second IP address in the same manner you would as if
it were connected directly to the LAN.
Click Start
->
Settings
->
Control Panel and double click Network Connections.
Right click on Local Area Connection (or appropriate network connection for the newly
installed PCI appliance) and select Properties.
Select Internet Protocol (TCP/IP) and click Properties.