SnapGear 2.0.1 - Manual (Page 150)

Virtual Private Networking
146
Adding a local certificate
1 Click the Add new Local Certificate tab. A window similar to the following will be
displayed.
Figure 9-24
Enter the Local Public Key certificate in the Local Certificate field. Click the Browse
button to select the file from the host computer. Certificates have time durations in which
they are valid. Ensure that the certificates uploaded are valid and that the Date and
Time settings have been set correctly on the CyberGuard SG appliance. Also ensure
that the certificate is in PEM or DER format.
Enter the Local Private Key certificate in the Private Key Certificate field. Click the
Browse button to select the file from the host computer. Ensure the certificate is the
private key for the above public key certificate. Also ensure that the certificate is in PEM
or DER format.
Enter the passphrase to unlock the private key certificate in the Private Key Certificate
Passphrase field.
Click the Add button to upload the certificates and passphrase.
Once a CA and local certificate has been uploaded, a window similar to the following will
be displayed.