SnapGear 2.0.1 - Manual (Page 59)

Dialin Setup
55
Dialin User Accounts
User accounts must be set up before remote users can dialinto the CyberGuard SG
appliance. The following figure shows the Dialin user account creation:
Figure 4-2
The field options in Add New Account are shown in the following table:
Field Description
Username Username for dialin authentication only. The name is case-
sensitive (e.g. Jimsmith is different to jimsmith).
Password Password for the remote dialin user.
Confirm Re-enter the password to confirm.
Domain If your network has a Windows domain server, you can attach a
domain name to your dial-in remote user accounts. This field is
optional and can be left blank.