SnapGear 2.0.1 - Manual (Page 50)

Network Connections
46
Routes
Additional routes
The Additional routes feature allows expert users to add additional static routes for the
CyberGuard SG appliance. These routes are additional to those created automatically by
the CyberGuard SG appliance configuration scripts.
Route management
Your CyberGuard SG appliance can be configured to automatically exchange routing
information with other routers. Note that this feature is intended for network
administrators adept at configuring route management services.
Check Enable route management, select the Protocol you wish to use to exchange
routes and click Apply. Once enabled, the routing manager can be configured by editing
zebra.conf and protocold.conf (e.g. bgpd.conf) through Advanced
-> Configuration
Files.
For more information on configuring route management, refer to: http://www.zebra.org/