SnapGear 2.0.1 - Manual (Page 91)

Firewall
87
Reports
Warning
The correct time/date must be set on your CyberGuard SG appliance for reporting to
work. The most effective way to do this is by using an NTP time server. See the Time
and Date section in the chapter entitled Advanced for details.
Blocked requests are submitted to the central content filtering server. The user
attempting to access blocked content can be identified either through User Accounts
(see User Authentication earlier in this chapter) or the IP Address of their machine.
Click View Reports to connect to the central content filtering server. You will be
prompted to enter your Customer ID, Username and Password that were issued with
your content filtering license.
Note
This username and password is not the same as the one used to access your
CyberGuard SG appliance.
Categories
Select which categories you wish to block. Selecting Unratable will block pages that the
central content filtering database has not yet categorized.
Figure 6-13