SnapGear 2.0.1 - Manual (Page 63)

Dialin Setup
59
Check the Log on to network and Enable software compression checkboxes. If your
CyberGuard SG appliance dialin server requires MSCHAP-2 authentication, you also
need to check the Require encrypted password checkbox. Leave all other Advanced
Options unchecked.
Select the TCP/IP network protocols from the Allowed network protocols list.
Warning
Do not select NetBEUI or IPX. If an unsupported protocol is selected, an error message
is returned when attempting to connect.
Click TCP/IP Settings and confirm that the Server Assigned IP Address, Server
Assigned Name, Server Address, Use IP Header Compression and Use Default
Gateway on Remote Network are all checked and click OK.
Dialin and log on to the remote CyberGuard SG appliance by double-clicking the
Connection Name icon. You need to enter the Username and the Password that was
set up for the CyberGuard SG appliance dial-in account.