Ipsec setup, Set up the branch office – SnapGear 2.0.1 User Manual
Page 122
Virtual Private Networking
118
IPSec Setup
CyberGuard SG appliance to CyberGuard SG appliance
There are many possible configurations in creating an IPSec tunnel. The most common
and simplest will be described in this section. Additional options will also be explained
throughout this example, should it become necessary to configure the tunnel with those
settings. For most applications to connect two offices together, a network similar to the
following will be used.
Figure 9-12
To combine the Headquarters and Branch Office networks together, an IPSec tunnel
must be configured on both CyberGuard SG appliances.
Set up the Branch Office
Enabling IPSec
Click the IPSec link on the left side of the Web Management Console web administration
pages. A window similar to the following will be displayed.