SnapGear 2.0.1 - Manual (Page 136)

Virtual Private Networking
132
Other options
The following options will become available on this page depending on what has been
configured previously:
A separate section may appear to enter multiple Local Networks or Remote Networks
or both. In the case where both local and remote parties have been configured to have
multiple subnets behind them, a window similar to the following will be displayed.
Figure 9-19
In the Subnet Settings section, a local and remote network combination can be added
one at a time by entering subnets into the Add Local Network and Add Remote
Network fields and then clicking Apply. Configured local and remote network
combinations can be deleted by clicking the Delete checkbox for the appropriate
combination and then clicking Apply. Once the required networks have been added,
configure the Phase 2 Settings section.
Configuring the Headquarters
Enabling IPSec
Click the IPSec link on the left side of the Web Management Console web administration
pages.