Sony MHC-S90D - Manual (Page 12)

MHC-S90D 4-235-983-43(2) GB
12 GB
VIDEO OUT
6 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
7 Connect the video input jack of your TV
to the VIDEO OUT jack with the video
cable.
When using a TV
Turn on the TV and select the video input so you can
view the pictures from this system.
Tip
For even higher quality video images, you can use an
optional S-video cable to connect the S VIDEO input
jack on your TV to the S VIDEO OUT jack.
8 For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
9 Connect the power cord of the DVD/
VIDEO CD/CD player to the A/V
amplifier.
0 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
qa (Except for Pan American and
European models)
Set the color system according to your
TV.
The color system is factory set to NTSC for
region code 3 models, and PAL for other
region code models. Each time you perform
the procedure below, the color system
changes as follows:
NTSC
y PAL
Use the buttons on the unit.
1 Press ?/1 to turn on the system.
2 Turn FUNCTION to select “DVD”.
3 Press x (DVD/VIDEO CD/CD player).
4 Press RETURN O and REPEAT (DVD/
VIDEO CD/CD player) simultaneously.
The system turns off.
5 Press ?/1 to turn on the system.
The color system is changed.
VOLTAGE SELECTOR
230-240V 220V 120V
Extend the FM lead
antenna horizontally.
AM loop antenna
Extend the FM lead
antenna horizontally.
AM loop antenna
Jack type B
FM75
AM
FM75
AM
COAXIAL
Jack type A
Hooking up the system (continued)