Sony MHC-S90D - Manual (Page 29)

MHC-S90D 4-235-983-43(2) GB
DVD/VIDEO CD/CD
29 GB
5
Select the title, chapter, or track you
want to program.
x When programming a DVD
For example, select chapter “03” of title
“02”.
Press
O/o or the numeric buttons to select
“02” under “T”, then press ENTER.
Next, press O/o or the numeric buttons to
select “03” under “C”, then press ENTER.
x When programming a VIDEO CD or
CD
For example, select track “02”.
Press
O/o or the numeric buttons to select
“02” under “T”, then press ENTER.
6
To program other discs, titles,
chapters, or tracks, repeat steps 3 to 5.
7
Press N SELECT (or SELECT DVD N
on the remote) to start Program Play.
Program Play starts.
To
Return to normal
playback
Turn off the Program
Display
Change the program
Cancel the
programmed order
Tip
The program you made remains in the system’s
memory even after it has been played back. Press N
SELECT (or SELECT DVD N on the remote) to
play the same program again.
Notes
• The program is canceled when you change the
function to TUNER or turn the system off.
• You may not be able to do Program Play depending
on the DVD.
• You cannot make a program while playing a disc.
• When you switch the play mode to “PROGRAM”
while “REPEAT 1” is selected, “REPEAT 1” is
automatically canceled.
PROGRAM
1. – – – –
ALL CLEAR
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
C
ALL
03
04
05
06
T
ALL
01
02
03
04
05
02
01
3 : DVD
T
ALL
PROGRAM
1. DVD – 0 2 – 0 3
ALL CLEAR
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
– : – – – –
– : – – – –
PROGRAM
1. CD – 02
ALL CLEAR
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
ALL
T
Selected title and chapter
Selected track
Do this
Press CLEAR during playback.
Press PLAY MODE when the
playback is stopped.
To change the disc, select the
step number you want to
change using
O/o after step 2
or 5, then press ENTER.
To change the title, chapter, or
track, select the one you want
in step 5.
To cancel all the titles,
chapters, or tracks in the
programed order, press
O, and
select “ALL CLEAR” in step
3. To cancel a step, select the
step using
O/o in step 3, then
press CLEAR.