Waking up to music – Sony MHC-S90D User Manual

Page 56

Advertising
background image

MHC-S90D 4-235-983-43(2) GB

56

GB

Waking up to music

— Daily Timer

You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Setting the time” on page 17).

1

Prepare the music source you want to
play.

• DVD/VIDEO CD/CD: Load a DVD/

VIDEO CD/CD.

• Tape: Load a tape with the side you

want to play facing forward.

• Radio: Tune in the preset station you

want (see “Listening to the radio” on
page 42).

2

Adjust the volume.

3

Press CLOCK/TIMER (or CLOCK/TIMER
SET on the remote).

“DAILY1 SET” appears.

4

Press

O or o repeatedly to select

“DAILY 1 (or 2)”, then press ENTER
(A/V amplifier or remote).

“ON” appears and the hour indication
flashes.

5

Set the time to start playback.

Press

O or o repeatedly to set the hour, then

press ENTER (A/V amplifier or remote).
The minute indication flashes.
Press

O or o repeatedly to set the minutes,

then press ENTER (A/V amplifier or
remote).
The hour indication flashes again.

6

Set the time to stop playback following
step 5.

7

Press

O or o repeatedly until the music

source you want appears.

The indications change as follows:

t TUNER y DVD PLAY T

t TAPE PLAY T

8

Press ENTER (A/V amplifier or remote).

The type of timer (“DAILY 1” or “DAILY
2”), followed by the start time, stop time
and the music source, appears, then the
original display appears.

9

Turn off the power.

To

Check the setting

Change the setting

Cancel the Daily
Timer

Notes

• If the power is on at the preset time, the Daily

Timer does not work.

• When you use the Sleep Timer, the Daily Timer

will not turn on the system until the Sleep Timer
turns it off.

• The power turns on 15 seconds before the preset

time.

Do this

Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote) and press

O or o

repeatedly to select the
respective mode (“DAILY 1”
or “DAILY 2”), then press
ENTER (A/V amplifier or
remote).

Start over from step 1.

Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote) and press

O or o

repeatedly to select “TIMER
OFF”, then press ENTER (A/V
amplifier or remote).

Advertising
This manual is related to the following products: