Sanyo DC-TS760 User Manual
Page 17
16
Track search [VCD] [CD]
Press the number buttons during play or in the stop mode, then press the
a
(Play) button. Play starts from the selected track.
Time search
[DVD]
1.
Press the SHIFT + SEARCH MODE buttons three times during play.
The time search screen appears.
Example:
2.
Press the number buttons to enter the time.
Example:
20 minutes 5 seconds
Press 2, 0, 0 then 5.
1 hour 4 minutes 35 seconds
Press 1, 0, 4, 3 then 5.
-
If you make a mistake, press the CLEAR button.
3.
Press the
a
(Play) button. Play starts from the searched time.
[VCD] [CD]
1.
Press the SHIFT + SEARCH MODE buttons once during play. The
time search screen appears.
2.
Press the number buttons to enter the time.
3.
Press the
a
(Play) button. Play starts from the searched time in the
track.
Fast play
Press the
c
or
d
button repeatedly to select the fast speed forward or
reverse play.
[DVD] [VCD]
“
c
1”, “
c
2”, “
c
3”, “
c
4” or “
d
1”, “
d
2”, “
d
3”, “
d
4”
[CD]
“
c
1”, “
c
2” or “
d
1”, “
d
2”
Press the
a
(Play) button to return to normal play.
Slow-motion play
[DVD]: Forward/Reverse slow play, [VCD]: Forward slow play only
Press the F.SLOW
or R.SLOW
button repeatedly to select the
forward or reverse slow speed play.
“
1”, “
2”, “
3”, “
4” or “
1”, “
2”, “
3”, “
4”
Press the
a
(Play) button to return to normal play.
Note:
The sound is muted during fast play or slow-motion play in DVD/VCD.
Still picture (Pause)
[DVD] [VCD]: Still picture mode, [CD]: Pause mode
Press the
k
button during play.
Press the
a
(Play) button to return to normal play.
Note: The sound is muted.
Frame by frame advance play [DVD] [VCD]
Press the
k
button during still play. Each time the button is pressed, the
picture advances one frame.
Press the
a
(Play) button to return to normal play.
Note:
-
The sound is muted.
-
Frame play is operative in forward mode only.
Time Search
--:--:--
Picture zoom (Pin point zoom) [DVD] (Fig. 19)
1. Press the SHIFT + 3 ZOOM buttons during normal, slow or still play.
The pin point guide screen appears.
-
If you quit the screen, press the SHIFT + 3 ZOOM buttons.
2. Press the
4
,
a
,
5
or
b
button, then the ENTER, or press the number
button to select the zoom point.
The screen is magnified. “
1” appears briefly on the screen.
If necessary, press the
4
,
a
,
5
or
b
button repeatedly to move the
screen.
3. Press the SHIFT + 3 ZOOM buttons again. The screen is magnified
more than “
1”. “
2” appears briefly.
4. Press the SHIFT + 3 ZOOM buttons to return to the original screen.
Note:
Picture zoom may not work on some discs.
Viewing from a desired camera angle (Multi-Angle)
[DVD] (Fig. 20)
Some DVD discs may contain scenes which have been shot simultaneously
from a number of different camera angles. The jacket or case of discs that
are recorded with angles will be marked.
Example:
Note: The recorded angles differ depending on the disc used.
1. Play the disc that is recorded with angles.
2. Press the SHIFT + 1 ANGLE buttons repeatedly until the desired
angle appears.
Example:
Angle replay [DVD]
During Multi-angle play screen, press the SHIFT + 2 A.REPLAY buttons.
The unit skips back to last approximately 10 seconds, changes it to the
next camera angle and plays it, and continues play. (If desired, press the
buttons again.)
1
2
3
4
5
6
7
8
9
3
3/5