Siemens Gigaset S450 IP - Manual (Page 13)

12
First steps
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / starting.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Making settings for VoIP
telephony
Before you can use the Internet (VoIP) to
phone any other users on the Internet, the
fixed network or the mobile phone net-
work, you need the services of a VoIP pro-
vider who supports the VoIP SIP standard.
Precondition: you have registered (e.g.
via your PC) with a suitable VoIP provider
and set up at least one VoIP account.
The following phone settings are neces-
sary in order for you to use VoIP. You will
receive all information from your VoIP pro-
vider.
u Your user name with the VoIP provider,
if this is required by the VoIP provider
u Your registration name
u Your password with the VoIP provider
u VoIP provider general settings
The connection assistant will help you
with the settings.
Starting the connection assistant
Precondition: The base station is con-
nected to the mains power supply and a
router. Your router is connected to the
Internet (page 11).
Tip: If
VoIP is activated as the default con-
nection for your phone (default setting
page 67), the phone will attempt to make
a direct connection to your VoIP provider's
server after the connection assistant is
closed. If incorrect/incomplete informa-
tion means that the connection cannot be
established, messages will be displayed
(page 14).
As soon as the handset battery is suffi-
ciently charged, the message key f on
the handset will flash (around 20 minutes
after you have put the handset in the
charging cradle). Press the message key
f to start the connection assistant.
You will see the following display:
§Yes§ Press the display key to start
the connection assistant.
~ Enter the system PIN (default
is '0000').
If you press §No§ , the procedure that fol-
lows is described below.
Downloading VoIP provider data
The phone establishes a connection with
the Siemens server on the Internet. Pro-
files with general access data for various
VoIP providers can be downloaded here.
After a brief period you will see the follow-
ing display:
Please note:
Your phone is preconfigured for dynamic
assignment of the IP address. In order for your
router to 'recognise' the phone, dynamic IP
address assignment must also be activated on
the router, i.e. the router's DHCP server is acti-
vated. Turn to page 69 to find out how to
assign your phone a static IP address if neces-
sary.
Please note:
The connection assistant will also start auto-
matically if you try to establish a connection
via the Internet, before you have made the
necessary settings.
You can also call up the connection assistant
at any time via the menu (page 68).
Connection Assist.
Start assistant
for entry of VoIP
connection data?
No Yes
Select Country
Germany
England
France
Netherlands, the
Ý
OK