Siemens Gigaset S450 IP - Manual (Page 57)

56
Using several handsets
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / T-NetBox_SAG-registration.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Using several handsets
Registering handsets
You can register up to six handsets to your
base station.
You can register your Gigaset S45 handset
on up to four base stations.
Registering another Gigaset S45
handset on the Gigaset SP450 IP
Before you can use your handset, you
must register it to a base station.
You must initiate handset registration on
the handset and on the base station.
If the handset was registered successfully,
the display will show the internal name for
the handset, e.g. Int 1 . If it does not, repeat
the procedure.
On the handset
v
¢
Ð Settings
¢
Handset
¢
Register H/Set
~ Enter the system PIN of the
base station (the default is
0000) and press §OK§ .
The display shows e.g. Reg-
str.Procedure and Base 2 flash.
On the base station
¤
Within 60 secs. press and hold the reg-
istration/paging key on the base station
(page 1) (min. 1 sec.).
The handset is assigned the lowest unas-
signed internal number (1–6). If several
handsets are registered to the base sta-
tion, the internal number is shown in the
display after registration, e.g. INT 2 . This
means that the handset has been assigned
the internal number 2.
Registering other handsets on the
Gigaset SP450 IP
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
¤
Press and hold the registration/paging
key on the base station (page 1)
(min. 1 sec.).
Please note:
– If there are several handsets registered to
your base station, then you can use one to
make a call via the Internet and the other to
make a call via the Internet or the fixed net-
work at the same time. A maximum of two
internal connections can also be made.
– As a rule, all calls from a registered GAP
handset are dialled via the connection
types (fixed network or VoIP, see page 67)
that have been set up as Default Line. If you
want to establish a connection via the other
connection type, enter a "*" (star) after the
phone number. Example:
049891234567*.
– After registration, all the phone numbers
for the phone will be assigned to the hand-
set as receiving numbers. It will use the
fixed network number and the first VoIP
number as sending numbers. For how to
change the assignments, see page 85.
Please note:
If six handsets are already registered to the
base station, there are two options:
– The handset with the internal number 6 is
in idle status: the handset you wish to reg-
ister is assigned the number 6. The handset
that was previously number 6 is de-regis-
tered.
– The handset with the internal number 6 is
being used: the handset you wish to regis-
ter cannot be registered.
Please note:
You can also make changes on the base station
with a Gigaset C45 handset.