Completing the voip settings – Siemens Gigaset S450 IP User Manual

Page 15

Advertising
background image

14

First steps

Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / starting.fm / 30.8.07

Ve

rs

ion 4,

16

.09.

2005

Completing the VoIP settings

If you have made all the required entries,

the message "

Connection data complete

" will

appear on the display. The handset returns

to idle status.
If all the settings are correct and if the

phone can establish a connection to the

VoIP server, then the internal name of the

handset will be displayed (example):

You can now use your phone to make calls

via the fixed network and the Internet.

Callers can reach you on your fixed

network number and your VoIP number.

No connection to the Internet/VoIP server

If one of the following messages is dis-

played instead of the internal name after

the connection assistant is closed, errors

have occurred:

u

Server not accessible!

u

Provider registration failed!

Below you will find possible causes and

measures you can take.

Server not accessible!

The phone has no connection to the Inter-

net.

¤

Check the cable connection between

the base station and the router (the

LED on the base station must light up)

and the connection between the router

and the Internet connection.

¤

Check whether the phone is connected

to the LAN.
– It may not have been possible to

dynamically assign an IP address to

the phone

or
– You have assigned a static IP address

to the phone that has either already

been assigned to another LAN sub-

scriber or does not belong to the

router's address block.

¤

Find the IP address using the hand-

set menu:

v

¢

Ð

Settings

¢

Base

¢

Local Network

(see page 69)

¤

Start the Web configurator with the

IP address.

¤

If no connection can be established,

change the settings on the router

(activate DHCP server) or the

phone's IP address.

Provider registration failed!

u

Your personal data for registering with

the VoIP provider may have been

entered incompletely or incorrectly.

¤

Check your entries for

Username

,

Authent. Name

and

Authent. Password

.

In particular, check your use of

upper and lower case.

To do this, open the following menu

on your handset:

v

¢

Ð

Settings

¢

Telephony

¢

VoIP

¢

Provider Registr.

(see page 69)

If the attempt to create the entry fails

(e.g. because the phone is not connected

to the Internet), a message to this effect is

displayed briefly (see page 14). You can then

create the entry later via the Gigaset.net direc-

tory (see page 27).

Please note:

To ensure that you can always be reached via

the Internet, the router must be permanently

connected to the Internet.

Ð

V

INT 1

10.08.06

09:45

FixedLine

IP

Advertising