Siemens Gigaset S450 IP User Manual

Page 61

Advertising
background image

60

Using several handsets

Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / T-NetBox_SAG-registration.fm / 30.8.07

Ve

rs

ion 4,

16

.09.

2005

Activating the room monitor and

entering the number to be called

v

¢

í

Add. Features

¢

Room Monitor

¤

Change multiple line input:

Room M.:

Select

On

to activate.

Call to:

Press the display key

§Edit§

and enter des-

tination number.
External number: Select number from

the directory or enter directly. Only the

last 4 characters are displayed.
Internal number: Delete any stored

external number.

§INT§

s (select hand-

set or

Call All

, if all registered handsets

are to be called)

§OK§

.

Store number with

Save

.

Level:

Set noise level sensitivity (

Low

or

High

).

¤

Save changes (page 101).

The function is now activated. With

v,

you can move directly to settings.

Changing previously set external

destination number

v

¢

í

Add. Features

¢

Room Monitor

s

Scroll to the

Call to:

line.

§Edit§

Press the display key.

X

Delete existing number.

¤

Enter number as described in "Activat-

ing the room monitor and entering the

number to be called" (page 60).

¤

Save changes (page 101).

Changing previously set internal

destination number

v

¢

í

Add. Features

¢

Room Monitor

s

Scroll to the

Call to:

line.

§Edit§

Press the display key.

§Yes§

Press the display key to con-

firm the prompt.

¤

Enter number as described in "Activat-

ing the room monitor and entering the

number to be called" (page 60).

¤

Save changes (page 101).

Caution!

You should always check the operation

of the room monitor before use. For

example, test its sensitivity. Check the

connection if you are diverting the room

monitor to an outside number.

– When the function is switched on the hand-

set's operating time is severely reduced. If

necessary, place the handset on the base

station. This ensures that the batteries do

not run down.

– Ideally the handset should be positioned 1

to 2 metres away from the baby. The micro-

phone must be directed towards the baby.

– The connection to which the room monitor

is diverted must not be blocked by an acti-

vated answer machine.

Please note:

An external number will be dialled via the set

standard connection (VoIP or fixed network).

If the number is to be dialled via the non-

standard connection, enter a star (*) at the

end of the number.

Advertising