Siemens Gigaset S450 IP - Manual (Page 73)

72
Web configurator
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / web_server.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Web configurator
The Web configurator is the Web interface
for your handset. It allows you to make the
settings for your phone's base station via
your PC's Web browser.
Configuring the phone via
your PC
Preconditions:
u A standard Web browser is installed on
the PC, e.g. Internet Explorer version
6.0 or higher, or Firefox version 1.0.4 or
higher.
u The phone and PC are connected with
each other via a router.
With the Web configurator on your phone
you have the following options:
u Configure your phone access to the
local network (IP address, gateway to
the Internet).
u Configure your phone for VoIP.
u Define the data server for firmware
updates and load new firmware onto
the phone if necessary.
u Copy contacts from the Outlook
address book on your PC into the hand-
set directories or back up your hand-
set's directories on your PC.
u Obtain information about your phone's
status (firmware version, MAC address
etc.).
Connecting PC with
Web configurator
¤
Launch the Web browser on your PC.
Precondition: The settings of an avail-
able firewall on the PC allow the PC and
telephone to communicate with each
other.
¤
Enter the phone's IP address into the
address field of the Web browser,
e.g. http://192.168.2.2.
Your phone's IP address can change if
you have activated dynamic IP address
assignment (page 75).
You can check the phone's current IP
address on the handset (page 70).
¤
Press the return key.
A connection is established to the phone's
Web configurator.
Registering, setting the
Web configurator language
Once you have successfully established
the connection, the Web page Login will
be displayed in the Web browser.
You can select the language you want the
menus and Web configurator dialogs to be
displayed in. The language that is cur-
rently selected is displayed in the top field
of the Web page.
¤
If necessary, click on to open the list
of available languages.
¤
Select the language.
¤
In the bottom field of the Web page,
enter your phone's system PIN (default
setting: 0000) to access the Web con-
figurator functions.
¤
Click on OK .
Please note:
Depending on your VoIP provider, it is possible
that you will be unable to change individual
settings in the Web configurator.
Please note:
– The phone is not blocked while you make
your settings in the Web configurator. You
can also use your phone to make calls or
change base station or handset settings on
your handset at the same time.
– While you are connected to the Web config-
urator, it is blocked to other users. It cannot
be accessed by more than one user at any
time.