Configuring telephone connections, E 77, pag – Siemens Gigaset S450 IP User Manual

Page 78

Advertising
background image

77

Web configurator

Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / web_server.fm / 30.8.07

Ve

rs

ion 4,

16

.09.

2005

Access to the Web configurator services

from other networks is only possible if

your router is set accordingly. The router

must pass on the service requests from

"outside" to Port 80 (standard port) of the

phone. Please also read the user guide for

your router.
To establish a connection, the public IP

address or the DNS name of the router

and, where applicable, the port number

on the router, must be indicated in the

Web browser of the remote PC.

Configuring telephone
connections

You can configure up to seven phone

numbers on your phone: your fixed net-

work number and six VoIP phone num-

bers.
You need to set up a VoIP account with a

VoIP provider for each VoIP phone num-

ber. You must save the access data for

each account and for the relevant VoIP

provider in the phone. You can assign a

name to each connection (VoIP and fixed

network).
To configure the connections:

¤

Open the following Web page:

Settings

¢

Telephony

¢

Connections

.

A list (see Figure 3) will be shown with all

possible connections that you can config-

ure, or have already configured, for your

phone.

The list will show the following:

Name

Name of the connection. This will show

the name that you have defined for the

connection (page 78, page 82) or the

default name (

IP 1

to

IP6

for VoIP con-

nections,

Fixed Line

for fixed network

connections).

Status

The status of the connection will be

shown for VoIP connections:

registered

The connection is activated. The phone

has been successfully registered. You

can use the connection to make calls.

Disabled

The connection is deactivated. The

phone is not registering with the corre-

sponding account with the VoIP serv-

ice. You can not use the connection to

make or receive calls.

Registration failed

/

Server not accessible

(Examples)
The phone could not be registered with

the VoIP service, e.g. because the VoIP

access data is incomplete or incorrect,

or because the phone is not connected

to the Internet. There is information

about this in the section entitled "Ques-

tions and answers" from page 94.

Figure 3 List of possible connections

Advertising