Belt clip and headset, Attaching the belt clip, Connection socket for headset – Siemens Gigaset S450 IP User Manual
Page 16
15
First steps
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / starting.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
u
The server address for the VoIP server
has not yet been entered, or has been
entered incorrectly.
¤
Start the Web configurator.
¤
Open
Settings
¢
Telephony
¢
Connections
Web page.
¤
Edit the server address where neces-
sary
Belt clip and headset
By using a belt clip and headset (optional)
you can easily make your handset a con-
stant companion both inside the building
and in its immediate vicinity.
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the display.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
Connection socket for headset
You can use headsets with jack connec-
tors. The following models have been
tested and are therefore recommended:
HAMA Plantronics M40, MX100 and
MX150.
The transmission quality of other models
cannot be guaranteed.
Please note:
If port forwarding is activated on your router
for the ports that have been registered as the
SIP port (Standard 5060) and the RTP port
(Standard 5004), it makes sense to deactivate
DHCP and assign the phone a static IP address
(otherwise you may not be able to hear the
other party during VoIP calls):
– Via the handset menu:
v
£
Ð
Settings
£
Base
£
Local Network
Or
– Via the Web configurator:
¥
Open
Settings
£
IP Configuration
Web page.
¥
Select
IP address type
.
Please note that the IP address and subnet
mask depend on the router's address block.
You must also enter the standard gateway and
DNS server. The IP address for the router is
generally entered here.