Siemens Gigaset S450 IP - Manual (Page 9)

8
First steps
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / starting.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
¤
Insert the batteries the right way round
(see figure).
The polarity is indicated in/on the battery
compartment.
The handset switches on automatically.
You will hear a confirmation tone.
Closing the battery cover
¤
First, align the notches on the side of
the battery cover with the protrusions
on the inside of the housing.
¤
Then press the cover until it clicks into
place.
Opening the battery cover
¤
If fitted, remove the belt clip.
¤
Place your finger in the headset socket
cavity and pull the battery cover
upwards.
Connecting the charging cradle
Connecting the charging cradle and
mounting it on the wall (if required) is
described at the end of this user guide.
¤
To charge the batteries, leave the hand-
set in the charging cradle.
For questions and problems see page 94.
Please note:
– Only place the handset in the charging cra-
dle that is intended for it.
– If the handset has switched itself off
because the batteries are flat and if it is
then placed in the charging cradle, it will
switch itself on automatically.