Starting firmware update, Activating voip status message display, Checking status information via your phone – Siemens Gigaset S450 IP User Manual
Page 94
93
Web configurator
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / web_server.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Starting firmware update
Preconditions:
u
No calls are being made via the fixed
network or VoIP.
u
There is no internal connection
between the registered handsets.
u
The base station menu is not open in
any of the handsets.
¤
Click on
Update Firmware
.
The firmware is updated. This process can
take up to 3 minutes.
Activating/deactivating the
automatic version check
When the version check is activated, the
phone checks on a daily basis whether the
Siemens configuration server is carrying a
new version of the phone firmware or of
the file with the general settings for your
VoIP provider.
If a new version is available, a notification
is sent to the handset and the message key
flashes. You can then carry out an auto-
matic update of the firmware (page 67) or
of the VoIP provider settings (page 69).
¤
Open the following Web page:
Settings
¢
Miscellaneous
.
¤
Click on the
Yes
option next to
Auto-
matic check for software/profile updates
to
activate the automatic version check.
Click on
No
if you do not want a version
check to be carried out.
¤
Click on
Set
to save the changes.
Activating VoIP status message
display
Display VoIP status messages on your
handset when there are VoIP connection
problems. These messages give you infor-
mation on the status of a connection and
contain a provider-specific code that helps
the service team when they are analysing
the problem.
¤
Open the following Web page:
Settings
¢
Miscellaneous
.
¤
Click on the
Yes
option after
Show VoIP
status on handset
to activate status mes-
sage display
If you click on
No
, no VoIP status mes-
sages are displayed.
¤
Click on
Set
to save the changes.
Checking status information via
your phone
General information about your phone is
displayed.
¤
In the menu list, click on the
Status
register.
The following information is displayed:
IP Configuration
IP address
The phone's current IP address within
the local network. For assigning the IP
address, see page 75.
MAC address
The phone's device address.
Software
Firmware version
Version of the firmware currently
downloaded. You can download
updates of the firmware on your phone
(page 67). Firmware updates are avail-
able on the Internet.
EEPROM version
Version of your phone's EEPROM stor-
age chip (page 113).
Please note:
You can also start the firmware update on the
handset (page 67).
Please note:
A table with possible status codes and their
meaning can be found in the Appendix on