Siemens Gigaset S450 IP - Manual (Page 58)

57
Using several handsets
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / T-NetBox_SAG-registration.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
De-registering handsets
You can de-register any registered handset
from any registered Gigaset S45 handset.
u
Open list of internal users.
The handset you are currently
using is indicated by < .
q Select the handset to be de-
registered.
§Options§ Press the display key.
De-reg. H/Set No.
Select and press §OK§ .
~ Enter the base station system
PIN (default setting: 0000).
§Yes§ Press the display key to con-
firm the prompt.
a Press and hold (idle status).
The handset is de-registered immediately,
even if it is not in idle status.
Locating a handset ("paging")
You can locate your handset using the
base station.
¤
Press the registration/paging key on the
base station (page 1) briefly.
¤
All handsets will ring at the same time
("paging"), even if ringer tones are
switched off.
Ending paging
¤
Press the registration/paging key on the
base station (page 1) briefly.
Or
¤
Press talk key c on a handset.
Changing the base station
If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception ( Best Base ).
v
¢
Ð Settings
¢
Handset
¢
Select Base
s Select one of the registered
base stations or Best Base and
press §OK§ .
Changing a handset's internal
number
A handset is automatically assigned the
lowest free number on registration. In the
list of internal subscribers, the handset is
sorted according to its internal number.
You can change the internal number of all
registered handsets (1–6). Numbers 1–6
can only be assigned once each.
u
Open list of handsets. Your
own handset is indicated by < .
§Options§ Press the display key.
Edit H/Set No.
Select and press §OK§ . The list of
handsets and their internal
numbers will be displayed.
The internal number for the
first handset flashes.
q Select handset.
~ Enter the new internal number
(1–6). The handset's old
number is overwritten.
q ~ If necessary, select further
handsets and change num-
bers.
After all the changes are completed:
§Save§ Press the display key to save
the input.
a Press and hold (idle status).
You will hear the error tone if an internal
number has been allocated twice.
¤
Repeat the procedure with a free
number.