Scanning with the spt 1700, Scanning with the spt 1700 -32 – Symbol Technologies SPT 1700 User Manual
Page 108
Advertising
3-32
SPT 1700 Series Product Reference Guide
To turn beaming off:
1.
Tap the Applications icon, then Prefs.
2.
In the pick list in the upper right corner, pick General.
The Beam Receive pick list gives you the options of On or Off.
Scanning with the SPT 1700
The SPT 1700 has an integrated laser bar code scanner which, if your unit is configured to
use scanning input, allows you to collect data by scanning bar codes.
To scan bar codes with the SPT 1700:
1.
Start your scanning application.
2.
Aim the scanner at the bar code.
3.
Press either the right, left or center scan trigger. Make sure the red scan beam
covers the entire bar code. The green scan LED lights and a beep sounds to
indicate a successful decode.
Advertising