Symbol Technologies SPT 1700 - Manual (Page 370)

21-6
SPT 1700 Series Product Reference Guide
To perform a hard reset:
1. Open and remove the battery cover.
2. Hold down the power button on the front of the SPT 1700 terminal.
3. While holding down the power button, use the tip of the stylus to gently press the
reset button on the back of the terminal.
4. Release the reset button.
5. Release the power button.
6. When a message displays on the SPT 1700 terminal screen warning that you are
about to erase all the data stored on your SPT 1700 terminal, do one of the
following:
• Press the upper half of either of the scroll buttons on the front panel of the SPT
1700 terminal to complete the hard reset and display the Digitizer screen.
• Press any other button to perform a soft reset.
Note: With a hard reset, the current date and time are retained. Formats
Preferences and other settings are restored to their factory default
settings.