Scanning 1-d bar codes using demo scan, Barcode application – Symbol Technologies SPT 1700 User Manual
Page 325
17-7
Applications: Laser Scanner
Options Menu
When you select the Options menu, its commands display on screen:
Scanning 1-D Bar Codes Using Demo Scan
To scan 1-D bar codes:
1.
Tap the
icon to open Demo Scan.
2.
Customize your scanner’s features by selecting from the various options described
previously.
3.
Aim the scanner at the bar code.
4.
Press either the right, left or center scan trigger or tap the Scan Button. Make sure
the red scan beam covers the entire bar code. The green scan LED lights and a
beep sounds to indicate a successful decode.
Barcode Application
The Barcode application is a basic receiving application, which demonstrates the terminal’s
scanning and signature capture capabilities. To use Barcode:
1.
Select the Barcode icon
from your main application screen.
Reset Defaults
Allows you to reset the default values.
About
Provides version information.