Symbol Technologies SPT 1700 User Manual
Page 143
7-9
Applications: Date Book
3.
Select the Alarm check box in the Event Details screen to activate the alarm. (Refer
to
on page 7-19 for details about setting alarm options.)
4.
Tap the Alarm units pick list to select Minutes, Hours or Days.
5.
Select the “5” (default) and enter any number from 0 to 99 (inclusive) as the
numeric alarm setting.
6.
Tap the OK button to close the Event Details screen and return to the Date Book
screen.
Note: You can set a silent alarm for an untimed event. In this case, the
alarm triggers at the specified period of minutes, hours or days
before midnight (beginning) of the day of the untimed event. No
audible alarm sounds for an untimed event; instead, the reminder
message displays on the screen of the SPT 1700 terminal.
For example, you could create a reminder for an untimed event that occurs on February
4th. If the alarm reminder is set for 5 minutes, the alarm reminder displays at 11:55 PM on
the night of February 3rd. The reminder remains on the screen until you turn on your SPT
1700 terminal and tap the OK button to dismiss it.
Once an alarm has gone off, you can dismiss the alarm for a 5 minute period using the
Snooze option.
Tap here to
select alarm unit
Enter numeric
setting here