Symbol Technologies SPT 1700 - Manual (Page 290)

14-24
SPT 1700 Series Product Reference Guide
To enter a permanent IP address:
1. Clear the IP Address check box to disable this option and display a permanent IP
address field below the check box.
2. Tap the space to the left of the first period then enter the first section of the IP
address.
Note: Each section must be a number from 0 to 255.
3. Tap and enter the remaining sections of the IP address.
4. Tap the OK button to confirm your selection and return to the Network Preferences
screen.
Creating a Login Script
A login script is a series of commands, similar to an autoexec.bat file, that automates
logging into your ISP. You can create login script files by selecting commands
from the
Command pick list in the Login Script screen. Some of these commands, such as Send,
require you to supply additional information and have a parameter field for the necessary
data.
Note: You can also use non-ASCII and literal characters in your login
script. Refer to Appendix B, Non-ASCII Characters for Login Scripts
for additional information.
Enter the IP address here